跳转到主内容

节点无法启动、并显示严重：PLX EEPROM文件错误

  1. 最后更新
  2. 另存为PDF
Views:
1
Visibility:
Public
Votes:
0
Category:
fas-systems<a>2009年304805</a>
Specialty:
hw
Last Updated:

适用场景

FAS8300

问题描述

  • 节点无法启动、并显示类似以下内容的错误：
CRITICAL: Wrong PLX EEPROM file BRD000000_PCIeSwitch0_Silicon0_Rev0.00 has been programmed to switch 2
The system will now halt.
  • 文件名和交换机编号可能略有不同、但会显示CRITICAL: Wrong PLX EEPROM file​​​​​​​ 错误

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.