网络端口显示“读取或写入 PHY 时出现故障”错误

最后更新
另存为PDF

Views:: 54

Visibility:: Public

Votes:: 0

Category:: aff-series

Specialty:: hw

Last Updated:

适用场景

AFF-A300
FAS8020

问题描述

Network interface port report "phyOperationFailed" messages in EMS

示例：

[?] Thu Mar 26 17:21:34 CST [Cluster-01: ltm_services: netif.phyOperationFailed:error]: Failure in reading or writing PHY for network interface e1a. Driver=ixgbe, error=103, regaddr=0x1ecc00, command=0x0, status=0x0. [?] Thu Mar 26 17:21:34 CST [Cluster-01: ltm_services: netif.phyOperationFailed:error]: Failure in reading or writing PHY for network interface e1a. Driver=ixgbe, error=103, regaddr=0x1ec850, command=0x0, status=0xc001. [?] Thu Mar 26 17:23:36 CST [Cluster-01: ltm_services: netif.phyOperationFailed:error]: Failure in reading or writing PHY for network interface e1a. Driver=ixgbe, error=103, regaddr=0x1ecc00, command=0x0, status=0x0. [?] Thu Mar 26 17:23:36 CST [Cluster-01: ltm_services: netif.phyOperationFailed:error]: Failure in reading or writing PHY for network interface e1a. Driver=ixgbe, error=103, regaddr=0x1ec850, command=0x0, status=0xc001. [?] Thu Mar 26 17:25:38 CST [Cluster0-1: ltm_services: netif.phyOperationFailed:error]: Failure in reading or writing PHY for network interface e1a. Driver=ixgbe, error=103, regaddr=0x1ecc00, command=0x0, status=0x0. [?] Thu Mar 26 17:25:38 CST [Cluster-01: ltm_services: netif.phyOperationFailed:error]: Failure in reading or writing PHY for network interface e1a. Driver=ixgbe, error=103, regaddr=0x1ec850, command=0x0, status=0xc001.