使用运行Cisco NXOS 9.3 (8)的交换机升级ONTAP后网络端口关闭
适用场景
- ONTAP 9
- ONTAP升级
- 无交换机配置
- Cisco NXOS 9.3 (8)
问题描述
- ONTAP升级后、数据端口e0e关闭。端口e0e连接到Cisco交换机
sysconfig -aslot 0: 1G/10G Ethernet Controller CNA EP 8324(Multiple Dual-port, QLogic CNA 8324(8362) rev. 2)e0e MAC Address: 00:a0:98:xx:xx:xx (auto-unknown-fd-down)e0f MAC Address: 02:a0:98:xx:xx:xx (auto-10g_twinax-fd-up)e0c MAC Address: 00:a0:98:xx:xx:xx (auto-unknown-fd-down)e0d MAC Address: 00:a0:98:xx:xx:xx (auto-unknown-fd-down)Device Type: EP8324NFirmware Version: 5.4.66.0- 重新拔插缆线/SFP两端后、端口保持关闭状态