跳转到主内容

更换 SFP 后, NIC 仍会发现 CRC 错误

Views:
60
Visibility:
Public
Votes:
0
Category:
fas-systems
Specialty:
hw
Last Updated:

适用场景

  • AFF A400
  • 10G/25G 以太网端口 e0g/e0h
  • SFP 更换
  • LC 光缆

问题描述

  • 中显示的端口联机 sysconfig -a
::> run -node <node_name> -command sysconfig -a
 slot 0: 10G/25G Ethernet Controller CX5-Mezz e0g MAC Address: d0:39:ea:xx:xx:xx(auto-10g_sr-fd-up) SFP Vendor: FINISAR CORP. SFP Part Number: FTLX8574D3BCL SFP Serial Number: xxx e0h MAC Address: d0:39:ea:xx:xx:xx (auto-10g_sr-fd-up) SFP Vendor: FINISAR CORP. SFP Part Number: FTLX8574D3BCL SFP Serial Number: xxx Device Type: CX5 PSID(NAP0000000007) Firmware Version: 16.26.4012 
 
  • 存储端口上的 SFP 最近已更换
  • ifstat 即使更换 SFP 后,受影响端口上的 CRC 错误也会增加
 
::> run -node <node_name> -command ifstat 

-- interface  e0g  (7 hours, 33 minutes, 13 seconds) --

RECEIVE
Total frames:    10739k | Frames/second:     395  | Total bytes:     14537m
Bytes/second:      534k | Total errors:     4947  | Errors/minute:      11
Total discards:      0  | Discards/minute:     0  | Multi/broadcast:   334k
Non-primary u/c:     0  | CRC errors:       4921  | Runt frames:         0
Fragment:            0  | Long frames:         0  | Jabber:              0
No buffer:           0  | Xon:                 0  | Xoff:                0
Pause:               0  | Jumbo:            1645k | Noproto:             0
Error symbol:        0  | Illegal symbol:     26  | Bus overruns:        0
Queue drops:         0  | LRO segments:     8397k | LRO bytes:       14247m
LRO6 segments:       0  | LRO6 bytes:          0  | Bad UDP cksum:       0
Bad UDP6 cksum:      0  | Bad TCP cksum:       0  | Bad TCP6 cksum:      0
Mcast v6 solicit:    0

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.