跳转到主内容

在系统上观察到多个 scsi.cmd.PasTimeToLive 消息实例

Views:
23
Visibility:
Public
Votes:
0
Category:
disk-shelves<a>2008793075</a>
Specialty:
hw
Last Updated:

适用场景

  • FAS8700/FAS8300 / AFF A400
  • SAS访问控制器:Broadcom SAS3616W

ONTAP 版本:

  • 9.7P17及更低版本
  • 9.8P10及更低版本
  • 9.9.0.1P7及更低版本
  • 9.10.1P1及更低版本

问题描述

  • 存储报告 SAS 适配器出现问题:

Tue Jun 01 13:20:59 +0000 [node-01: asd_asyncd_1a: sas.port.down:debug]: SAS port "1b" went down.

  • 适配器将保持联机状态,并且端口本身也会恢复。
slot 1: SAS Host Adapter 1b (Broadcom SAS3616W rev. 2, SAS, <UP>) Firmware rev: 17.00.00.00 NVDATA rev: 17.01.00.11 Base WWN: 5:00605b:01098a9:84 MFG Part Number: 111-04226 Board Name: HBA 9405W-16e Assembly: 03-50044-10006 Serial number: XXXXXXXXXX Phy State: [0] Enabled, 6.0 Gb/s [1] Enabled, 6.0 Gb/s [2] Enabled, 6.0 Gb/s [3] Enabled, 6.0 Gb/s Mini-SAS HD Vendor: Molex Inc. Mini-SAS HD Part Number: 112-00430+A0 Mini-SAS HD Type: Passive Copper (unequalized) 2m end_0
  • 将磁盘架添加到连接到适配器的现有堆栈后,所有这些磁盘架都会开始报告以下消息:

Wed Jun 02 12:32:05 +0000 [node-01: scsi_cmdblk_strthr_admin: scsi.cmd.pastTimeToLive:error]: Unknown device 1b.19.99: request failed after try #1: cdb 0x12.

Wed Jun 02 12:32:05 +0000 [node-01: scsi_cmdblk_strthr_admin: scsi.cmd.pastTimeToLive:error]: Unknown device 1b.18.99: request failed after try #1: cdb 0x12.

Wed Jun 02 12:32:05 +0000 [node-01: scsi_cmdblk_strthr_admin: scsi.cmd.pastTimeToLive:error]: Unknown device 1b.17.99: request failed after try #1: cdb 0x12.

Wed Jun 02 12:32:05 +0000 [node-01: scsi_cmdblk_strthr_admin: scsi.cmd.pastTimeToLive:error]: Unknown device 1b.16.99: request failed after try #1: cdb 0x12.

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.