跳转到主内容

由于意外软件错误,多个以太网端口失败 QL : 244

Views:
15
Visibility:
Public
Votes:
0
Category:
fas-systems
Specialty:
hw
Last Updated:

适用场景

  • QLogic CNA8324适配器
  • QLogic ISP 8324;双端口16 Gb FC/10GbE PCIe CNA卡P/N X1143A 

问题描述

  • CNNA适配器上的多个以太网端口不可用、并且ONTAP未将其标记为出现故障。

::> ucadmin show
node_name  1a    cna   target    -     -      offline
node_name  1b     cna    target    -     -      offline

 

  • 系统上可能会显示以下消息:

node_name  ALERT netif.init.failed: Initialization of network interface e0d failed due to unexpected software error ql:244.
node_name  ALERT netif.init.failed: Initialization of network interface e0c failed due to unexpected software error ql:244.

或卡

[node_name:netif.init.failed:ALERT]: Initialization of network interface e1a failed due to unexpected software error ql:244.
[node_name:netif.init.failed:ALERT]: Initialization of network interface e1b failed due to unexpected software error ql:244.

 

  • ONTAP不再显示端口本身。
Cluster::> system node run -node <node name> -command sysconfig -a

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.