跳转到主内容

带内 ACP 报告“正在初始化”、“固件 - 需要更新”或“不支持” IOM 6 模块

Views:
75
Visibility:
Public
Votes:
0
Category:
disk-shelves
Specialty:
hw
Last Updated:

适用场景

  • 带内备用控制路径( ACP )
  • IOM6 模块
  • ONTAP 9.x

问题描述

  • 在 ONTAP 9.x 中、带内 ACP 是默认配置。
  • ACP 模块可能会报告以下内容而不是活动的内容:
    • initializing
    • firmware-update-required
    • unsupported
  • ACP 状态显示在 EMS 日志中(状态发生初始更改时):

Mon Aug 05 10:07:15 CEST [CLUSTER-01: dsa_worker1: ses.status.ACPWarn:error]: DS4246 (S/N SHFxxxxxxxxxxxx) shelf 1 on channel 0a ACP Processor warning for SAS shelf ACP processor 1: ACP status not available. Element in transition mode. This module is on the rear of the shelf at the top center, on shelf module A.
Mon Aug 05 10:07:16 CEST [CLUSTER-01: sem_broker: acp.need.firmware.update:error]: ACP module  (NA) needs a firmware upgrade, (disk shelf serial number: SHFxxxxxxxxxxxx).

  • 可以使用以下命令随时检查状态:

::> storage shelf acp module show -fields protocol-version ,firmware-version ,state,module-name,iom-type ,shelf-serial-number 
node      module-name protocol-version firmware-version shelf-serial-number iom-type state 
------------ ----------- ---------------- ---------------- ------------------- -------- ------------------------ 
CLUSTER-01  1.01.A    0.0.0.0      0.0        SHFxxxxxxxxxxxx    iom6    firmware-update-required 
CLUSTER-01  1.01.B    0.0.0.0      0.0        SHFxxxxxxxxxxxx    iom6    firmware-update-required 
CLUSTER-01  1.02.A    0.0.0.0      0.0        SHFxxxxxxxxxxxx    iom6    unsupported 
CLUSTER-01  1.02.B    0.0.0.0      0.0        SHFxxxxxxxxxxxx    iom6    unsupported 

::> system node run -node * -command acpadmin ibacp_list_all
 
Node: CLUSTER-01
Number of ACP modules 2
MAC         SES   Last Contact  Protocol   Assigner   Shelf        Current Inband   IOM    shelf
Address       bit   (seconds ago) Version   ACPA ID    S/N         State   ID     Type   flag
---------------------------------------------------------------------------------------------------------------
00:a0:98:xx:xx:xx  00    6780     1.2.02.10   0       SHFxxxxxxxxxxxx   0x9   0a.01.A IOM6    0x20
00:a0:98:xx:xx:xx  00    1432     1.2.02.10   0       SHFxxxxxxxxxxxx   0x9   0b.01.B IOM6    0x20
00:a0:98:xx:xx:xx  00    4452     1.2.02.10   0       SHFxxxxxxxxxxxx   0xe   0a.02.A IOM6    0x20
00:a0:98:xx:xx:xx  01    1121     1.2.02.10   0       SHFxxxxxxxxxxxx   0xe   0b.02.B IOM6    0x20

  • 在 AutoSupport 的存储模块 .xml 和 ACP-IBACCP-list (所有部分)中可以分别找到相同的信息。

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.