跳转到主内容

在ONTAP 9.10.1之前、Ifgrp接口会生成vifmgr.cluscheck.crcerrors或vifmgr.cluscheck.hwErrors

Views:
35
Visibility:
Public
Votes:
1
Category:
fas-systems
Specialty:
nas<a>20087322227</a>
Last Updated:

适用场景

9.10.1之前的ONTAP 9版本

问题描述

  • EMS 将查找 ifgrp 接口生成警报 vifmgr.cluscheck.crcerrors

nodename::*> event log show -message-name vifmgr.cluscheck.crcerrors
Time                Node             Severity      Event
------------------- ---------------- ------------- ---------------------------
4/22/2021 00:42:39  nodename
                                     ALERT         vifmgr.cluscheck.crcerrors: Port a0a on nodename
                                     is reporting a high number of observed hardware errors, possibly CRC errors.

ALERT  vifmgr.cluscheck.hwerrors: Port a1a on node ***** is reporting a high number (at least 1 per 1000 packets) of observed hardware errors (CRC, length, alignment, dropped).

  • Total errorsTRANSMIT第节中的ifgrp (本示例中为a0a)增加、但ifgrp中的每个底层物理端口不会显示任何错误:

-- interface  a0a  (1 hour, 59 minutes, 59 seconds) --

RECEIVE
 Total frames:      307m | Frames/second:   42721  | Total bytes:       409g
 Bytes/second:    56881k | Total errors:        0  | Errors/minute:       0
 Total discards:      0  | Discards/minute:     0  | Multi/broadcast:  4315
 Non-primary u/c:     0  | Errored frames:      0  | Unsupported Op:      0
 CRC errors:          0  | Runt frames:         0  | Fragment:            0
 Long frames:         0  | Jabber:              0  | Length errors:       0
 Alignment errors:    0  | No buffer:           0  | Xon:                 0
 Xoff:                0  | Pause:               0  | Jumbo:               0
 Noproto:             0  | Error symbol:        0  | Illegal symbol:      0
 Bus overruns:        0  | Queue drops:         0  | LRO segments:        0
 LRO bytes:           0  | LRO6 segments:       0  | LRO6 bytes:          0
 Bad UDP cksum:       0  | Bad UDP6 cksum:      0  | Bad TCP cksum:       0
 Bad TCP6 cksum:      0  | Mcast v6 solicit:    0  | Lagg errors:         0
 Lacp errors:         0  | Lacp PDU errors:     0
TRANSMIT
 Total frames:      397m | Frames/second:   55169  | Total bytes:       512g
 Bytes/second:    71122k | Total errors:     2720  | Errors/minute:      23  
 Total discards:      0  | Queue overflow:      0  | Multi/broadcast:   966
 Max collisions:      0  | Single collision:    0  | Multi collisions:    0
 Late collisions:     0  | Xon:                 0  | Xoff:                0
 Pause:               0  | Jumbo:               0  | Cfg Up to Downs:     0
 TSO non-TCP drop:    0  | Split hdr drop:      0  | Timeout:             0
 TSO segments:    18907k | TSO bytes:         481g | TSO6 segments:       0
 TSO6 bytes:          0  | HW UDP cksums:   10068  | HW UDP6 cksums:      0
 HW TCP cksums:   82875k | HW TCP6 cksums:      0  | Mcast v6 solicit:    0
 Lagg drops:          0  | Lagg no buffer:      0  | Lagg no entries:     0
DEVICE
 Mcast addresses:     1  | Rx MBuf Sz:          0
LINK INFO
 Speed:   n/a | Duplex:             n/a | Flowcontrol:        n/a
 Media state:     active | Up to downs:          1

 

 

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.