跳转到主内容

NX5596 上的 ISL 端口可能出现故障

  1. 最后更新
  2. 另存为PDF
Views:
2
Visibility:
Public
Votes:
0
Category:
fas-systems
Specialty:
network
Last Updated:

适用场景

  • ONTAP 9
  • Cisco NX5596 集群网络交换机
  • 支持的 NX-OS 和 RCF 版本

问题描述

system health alert show 输出中存在以下错误：
 
The cable used to connect switch "switch(sn#) /Ethernet1/41" to the ISL port might be faulty. For the port-channel, please check each individual link.
The cable used to connect switch "switch(sn#)/Ethernet1/42" to the ISL port might be faulty. For the port-channel, please check each individual link.
The cable used to connect switch "switch(sn#) /Ethernet1/43" to the ISL port might be faulty. For the port-channel, please check each individual link.
The cable used to connect switch "switch(sn#)/Ethernet1/44" to the ISL port might be faulty. For the port-channel, please check each individual link.

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.