跳转到主内容

如何在更换启动设备期间设置环境变量

  1. 最后更新
  2. 另存为PDF
Views:
10
Visibility:
Public
Votes:
0
Category:
fas-systems
Specialty:
hw
Last Updated:

适用场景

  • AFF 型号
  • FAS 型号
  • ONTAP 9.3+

问题描述

  • 在更换启动设备期间 ，可能需要手动设置某些环境变量
  • 更换启动设备的每个过程 都包含一个详细说明步骤，该步骤使用 setenv LOADER 命令来配置变量
  • 环境变量也可以称为 bootarg
  • 仅限此 操作步骤 适用场景 ONTAP 9.3及更高版本

 

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.