跳转到主内容

"storage disk show" 中显示的外部 LUN 大小不正确

Views:
25
Visibility:
Public
Votes:
0
Category:
fas-systems
Specialty:
san
Last Updated:

适用场景

  • ONTAP 9.6
  • 外部 LUN 导入( FLI )
  • Hitachi AMS 2300

问题描述

  • 使用 FLI 将 100 GB LUN 从 AMS 2300 迁移到 ONTAP 存储时,的输出将显示源 LUN 大小为 87.50GB storage disk show

示例:

FAS8200::> storage disk show -array-name HITACHI_XXXXX -instance
Disk: HIT-1.1
Container Type: unassigned
Owner/Home: - / -
DR Home: -
Stack ID/Shelf/Bay: - / - / -
LUN: 0
Array: HITACHI_XXXXX
Vendor: HITACHI
Model: DF600F
Serial Number: 922139130004
UID: 48495441:43484920:39323231:33393133:30303034:00000000:00000000:00000000:00000000:00000000
BPS: 512
Physical Size: 87.50GB
Position: present
Checksum Compatibility: block
…………
  • 创建的目标 LUN 大小正确,为 100 GB

示例:

FAS8200::> lun create -vserver fli -path /vol/fli_vol/OnlineFLI_LUN -ostype solaris -foreign-disk 9221391XXXXX
 
Created a LUN of size 100g (107374182400)

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.