跳转到主内容

FAS2750 无法迁移到高级磁盘分区（ ADP ）

  1. 最后更新
  2. 另存为PDF
Views:
66
Visibility:
Public
Votes:
0
Category:
fas-systems
Specialty:
hw
Last Updated:

适用场景

  • FAS2750 HA 对部署为具有 12 个磁盘的单节点集群
  • 添加了 12 个额外磁盘
  • 内部磁盘架

问题描述

  • 无法启动 ONTAP
  • 启动菜单中的选项 4 （将磁盘置零并初始化）显示错误：
bootarg.bootmenu.selection is |4a|
BOOTMGR: The system has 0 disks assigned whereas it needs 3 to boot, will try to assign the required number.
Sep 28 09:45:50 [localhost:raid.autoPart.disabled:ALERT]: Disk auto-partitioning is disabled on this system: the system needs a minimum of 8 usable internal hard disks.
BOOTMGR: already_assigned=0, min_to_boot=3, num_assigned=0
BOOTMGR: No disks assigned to this system, looking for 3 unassigned partitions.
Sep 28 09:45:50 [localhost:callhome.raid.adp.disabled:ALERT]: Disk auto-partitioning is disabled on this system: ADP DISABLED. Terminatedssigned 0 out of 3 disks requested"

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.