EMS 日志报告 env_mgr: monitor.temp.unreadable: 控制器温度 (****) 不可读

最后更新
另存为PDF

Views:: 291

Visibility:: Public

Votes:: 1

Category:: fas-systems

Specialty:: HW

Last Updated:

适用于

ONTAP 9
AFF 系统
ASA 系统
FAS 系统

问题

控制器无法读取温度传感器报告。
EMS 日志报告以下事件。

[env_mgr: monitor.temp.unreadable:error]: The controller temperature (Module B Expander Temp) is not readable. [env_mgr: monitor.temp.unreadable:error]: The controller temperature (Module A Expander Temp) is not readable. [env_mgr: monitor.temp.unreadable:error]: The controller temperature (Midplane 4 Temp) is not readable. [env_mgr: monitor.temp.unreadable:error]: The controller temperature (Midplane 3 Temp) is not readable. [env_mgr: monitor.temp.unreadable:error]: The controller temperature (Midplane 2 Temp) is not readable. [env_mgr: monitor.temp.unreadable:error]: The controller temperature (Midplane 1 Temp) is not readable. [env_mgr: monitor.temp.unreadable:error]: The controller temperature (Ambient Temp) is not readable. [env_mgr: monitor.chassisPower.degraded:warning]: Chassis power is degraded: Sensor detecting voltage anomalies.

monitor.temp.unreadable: monitor.temp.unreadable: The controller temperature (Mezz Temp2) is not readable

[monitor.temp.unreadable:error]: The controller temperature (PCISW-3 Die Temp) is not readable. [monitor.temp.unreadable:error]: The controller temperature (PCISW-4 Die Temp) is not readable. [monitor: monitor.globalStatus.critical:EMERGENCY]: Chassis temperature is too high..

Chassis temperature is too high.. EMS 可能会因传感器损坏而报告以下内容

Feb 18 10:18:19 [netapp01-06:callhome.chassis.hitemp:error]: Call home for CHASSIS OVER TEMPERATURE

SP-LATEST-IPMI 可能会报告控制器传感器failed的状态：

PCISW-3 Die Temp failed -- C 0 C 5 C 90 C 100 C PCISW-4 Die Temp failed -- C 0 C 5 C 90 C 100 C