磁盘在 "sysconfig － r" 中保持 " 测试 " 状态

最后更新
另存为PDF

Views:: 17

Visibility:: Public

Votes:: 0

Category:: fas-systems

Specialty:: hw

Last Updated:

适用于

ONTAP 9
FAS8200

问题

磁盘将在磁盘 0d.10.3 和维护池中开始测试。

EMS 日志示例：

Thu Feb 20 03:54:54 JST [node-02: config_thread : raid.disk.maint.start:notice ]:Disk 0d.10.3 Shelf 10 Bay 3 [NETAPP X343_SSKBE1T8A10 NA01] S/N XXXXXXXX] UID [5000C500:C144C6DF:00000000:00000000]will be tested.

经过一段时间后、“sysconfig -r”仍处于维护状态、但已通过“sysconfig -a”确认、磁盘处于故障状态。

“sysconfig -a”和“sysconfig -r”示例：

・ sysconfig － a

NetApp Release 9.5P6: Wed Jul 10 19:00:56 EDT 2019 System ID: XXXXXXXXXX (node-02); partner ID: XXXXXXXXXX (node-01) System Serial Number: XXXXXXXXXXXX (node-02)

slot 0: SAS Host Adapter 0a (PMC-Sierra PM8072 rev. C, SAS, ＜UP＞) 10.3 : NETAPP X343_SSKBE1T8A10 NA01 1713.5GB 520B/sect (XXXXXXXX) (Failed)

slot 0: SAS Host Adapter 0d (PMC-Sierra PM8072 rev. C, SAS, ＜UP＞) 10.3 : NETAPP X343_SSKBE1T8A10 NA01 1713.5GB 520B/sect (XXXXXXXX) (Failed)

・ sysconfig – r

Maintenance disks

RAID Disk Device HA SHELF BAY CHAN Pool Type RPM Used (MB/blks) Phys (MB/blks) --------- ------ ------------- ---- ---- ---- ----- -------------- -------------- testing 0a.10.3 0a 10 3 SA:B 0 SAS 10000 1713523/3509295616 1716957/3516328368 (fast zeroed)