连接到Cisco Nexus Fabric Extender时控制器发生崩溃

最后更新
另存为PDF

Views:: 18

Visibility:: Public

Votes:: 0

Category:: fas-systems

Specialty:: hw

Last Updated:

适用场景

FAS9000
FAS8200
FAS27x0
FAS26x0
AFF A200
AFF A220
AFF A300
AFF A700
ONTAP 9
QLogic 8324 CNNA
Cisco Nexus 2348UPQ阵列扩展器(FEX)
Cisco Nexus N2K-C2232PP-10GE 阵列扩展器(FEX)

问题描述

将qlogic适配器连接到Nexus FEX时、存储节点将发生panic

PANIC : PCI Error NMI from device(s):RPT(0,3,3):QLogic FC/10GbE CNA on Controller.

version: 9.5P15: Tue Nov 17 02:40:18 EST 2020

conf : x86_64.optimize

cpuid = 4

KDB: stack backtrace:

vpanic() at vpanic+0x6d9/frame 0xfffffe0258b59c50

panic() at panic+0x43/frame 0xfffffe0258b59cb0

platform_os2sp_port_present() at platform_os2sp_port_present+0x259/frame 0xfffffe0258b59ce0

psl_search_list() at 0xffffffff8213db10/frame 0xfffffe0258b59d20

generic_nmi_handler() at generic_nmi_handler+0xe4/frame 0xfffffe0258b59d60

trap() at trap+0x7f0/frame 0xfffffe0258b59f20

Xnmi() at Xnmi+0xd3/frame 0xfffffe028649e470

ql_rdwr_indreg32() at ql_rdwr_indreg32+0xca/frame 0xfffffe028649e4b0

ql_minidump() at ql_minidump+0x77a/frame 0xfffffe028649e660

ql_del_cdev() at ql_del_cdev+0x85f/frame 0xfffffe028649e800

devfs_allocv() at devfs_allocv+0x29dc/frame 0xfffffe028649e850

kern_ioctl() at kern_ioctl+0x230/frame 0xfffffe028649e8c0

sys_ioctl() at sys_ioctl+0x16c/frame 0xfffffe028649e990

amd64_syscall() at amd64_syscall+0x18b/frame 0xfffffe028649eab0

Xfast_syscall() at Xfast_syscall+0xfb/frame 0xfffffe028649eab0

--- syscall (54, FreeBSD ELF64, sys_ioctl), rip = 0x8004cd23a, rsp = 0x7fffffffea58, rbp = 0x7fffffffeb40 ---

PCI Error NMI from device(s):ErrSrcID(CorrSrc(0x2900),UCorrSrc(0)), RPT(0,2,0):QLogic FC/10GbE CNA in slot 2 on Controller.

存储节点从崩溃状态启动后、CNNA端口将停留在初始化固件状态

cluster::> run -node node1 sysconfig -v 2 slot 2: Fibre Channel Target Host Adapter 2a (QLogic CNA 8324 (8362) rev. 2, <INITIALIZING FIRMWARE>) Firmware rev: 8.9.0 Flash rev: 6.0.1 Host Port Addr: 000000 FC Nodename: 50:0a:09:80:80:72:e6:d6 (500a09808072e6d6) FC Portname: 50:0a:09:88:80:72:e6:d6 (500a09888072e6d6) Connection: No link Switch Port: Unknown

与交换机的连接显示其闪烁、未连接或可能正常。
将Cisco交换机升级到9.3 (8)版时、可能会触发此消息