跳转到主内容

是否可以在不同子网上配置e0M和SP/BMC接口?

Views:
32
Visibility:
Public
Votes:
0
Category:
fas-systems
Specialty:
core
Last Updated:

适用场景

  • 所有 FAS 系统
  • 所有AFF系统(AFF A700s和AFF A800除外)

问题解答

短问题解答是可以的、但不应该是。尽管没有可防止此配置不当的防护措施、但 e0M和SP/BMC应始终位于同一子网中。

在e0M接口和SP/BMC网络接口上配置的逻辑接口(Logical Interface、LIFs)均通过内部网络交换机连接到外部管理网络、并连接到一个物理端口(以图形方式标识为"扳手"端口)。

1控制器具有单独的专用RJ45端口,用于e0M和BMC接口,例如AFF A700s和AFF A800,可以在不同子网上进行配置。

2 无论控制器是共享还是分离e0M和SP/BMC接口,最佳实践都是不应在任何数据子网中配置任何接口。过多的数据流量可能会抢占或干扰对e0M或SP/BMC接口的访问、从而损害控制器的整体管理。

追加信息

e0M接口专用于ONTAP管理活动、而SP/BMC接口则专用于带外辅助功能(远程开机/关机/状态、日志收集等)。任何接口都不应位于任何数据子网中。

  • e0M管理接口和SP/BMC网络接口连接到控制器内部交换机的两个端口。
  • 内部交换机的第三个端口连接到外部 Wrench 端口(RJ45)、允许从外部进行访问。

FAS 系统

注意:e0M和SP/BMC接口不支持VLAN标记,必须连接到 访问 端口。请参见 e0M、服务处理器或由于交换机端口上的VLAN标记而无法通过网络访问BMC

 

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.