如电池电量严重（ "Bat initial FCC" 不可读），请致电主页

最后更新
另存为PDF

Views:: 4

Visibility:: Public

Votes:: 0

Category:: ontap-9

Specialty:: hw

Last Updated:

适用于

FAS 8060
AFF8060

问题

更换主板后， ONTAP 会在启动过程中报告以下错误消息：

Oct 07 18:27:07 [SYD2SISFAS02:nvram.battery.sensor.unreadable:EMERGENCY]: The NVRAM battery state cannot be determined because the 'Bat Initial FCC' sensor is unreadable. To prevent data loss, the system will shut down in 5 minutes.
 Oct 07 18:27:37 [SYD2SISFAS02:callhome.battery.failure:EMERGENCY]: Call home for BATTERY ('Bat Initial FCC' unreadable) CRITICAL.

Wed Oct 7 12:50:11 GMT [nvram.hw.initFail:CRITICAL]: NVRAM hardware initialization failed: DDR DIMM is not present or failed to train. ****************************************************************** * CRITICAL ERROR * * NVRAM has detected errors. Ontap cleared the error. *