跳转到主内容

10 Gb以太网卡上的两个端口均已关闭

Views:
26
Visibility:
Public
Votes:
0
Category:
aff-series<a>X1143A</a><a>端口已关闭</a><a>以太网</a>
Specialty:
hw
Last Updated:

适用场景

  • AFF8080
  • ONTAP 9.5
  • 双端口10G以太网控制器CNA 卡

问题描述

  • 两个端口均已关闭
  • 这两个端口以物理方式连接到不同的交换机和不同的网络

sysconfig -a example:

 slot 3: Dual-port 10G Ethernet Controller CNA ISP 8324 (Dual-port, QLogic CNA 8324(8362) rev. 2) e3a MAC Address: 0x:ax:xx:xx:4x:7x (auto-unknown-fd-down) 

EMS日志 消息示例:

ERROR net.ifgrp.lacp.link.inactive: ifgrp a1d, port e3a has transitioned to an inactive state. The interface group is in a degraded state
ERROR net.ifgrp.lacp.link.inactive: ifgrp a1d, port e3b has transitioned to an inactive state. The interface group is in a degraded state

[filerxx: mgmt_port_link_status_poll: netif.linkDown:info]: Ethernet e3a: Link down, check cable.

 

  • 端口和ifgrp状态为down: 
::> net port show
::> net port ifgrp show -node <node_name> -ifgrp <ifgrp_name> -instance
::> net port show -node <node_name> -port <port_name> -instance
  • 电缆 重新安装/更换 不可用
  • 存储控制器SFP 重新安装/更换 失败
  • 交换机端口SFP 重新安装/更换 不可用
  • 正在使用其他交换机端口、但此操作不可用 

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.