跳转到主内容

SAS 端口的琥珀色 LED 亮起,无任何错误

Views:
15
Visibility:
Public
Votes:
0
Category:
fas-systems
Specialty:
hw
Last Updated:

适用场景

  • FAS8300/AFF A400
  • ONTAP 9

问题描述

SAS 端口( 0a , 0b , 0c , 0d )的琥珀色 LED 亮起,未显示任何错误。

  • 输出 sysconfig -a 显示端口 0a 和 0d 已连接缆线且运行正常。

slot 0: SAS Host Adapter 0a (Broadcom SAS3616W rev. 2, SAS, <UP>)
Firmware rev:      12.00.00.00
NVDATA rev:        12.03.01.02
Base WWN:          5:00a098:00e4976:40
Phy State:         [0] Enabled, 12.0 Gb/s
                   [1] Enabled, 12.0 Gb/s
                   [2] Enabled, 12.0 Gb/s
                   [3] Enabled, 12.0 Gb/s
Mini-SAS HD Vendor:        Molex Inc.
Mini-SAS HD Part Number:   112-00437+A0
Mini-SAS HD Type:          Passive Copper (unequalized) 2m end_1
Mini-SAS HD Serial Number: 023330042

  • BMC 命令 system fru led show all 显示警示(琥珀色) LED 亮起。
BMC node-02> system fru led show all
0 LED_SYSTEM_LOCATION_01 is off
1 LED_SYSTEM_ATTEN_01 is off
2 LED_CONTROLLER_ATTEN_01 is off
......
9 LED_SAS_ATTEN_01 is on <-- SAS port 0a
10 LED_SAS_ATTEN_02 is on <-- SAS port 0b
11 LED_SAS_ATTEN_03 is on <-- SAS port 0c
12 LED_SAS_ATTEN_04 is on <-- SAS port 0d
 

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

Scan to view the article on your device