跳转到主内容

更换主板后、PCM无法启动、并显示消息The incorrect NVMEM batterY is installed

Views:
12
Visibility:
Public
Votes:
0
Category:
fas-systems<a>FSE</a>
Specialty:
hw
Last Updated:

适用场景

  • FAS8300 / FAS8700 / AFF A400
  • FAS2720
  • BMC固件

问题描述

更换主板(PCM)后的型号在适用场景 部分中、启动期间出现以下错误:

Jul 28 13:46:54 [localhost:monitor.shutdown.cancel:notice]: Automatic shutdown sequence canceled.
Jul 28 13:48:07 Battery charge capacity: 1300 mA*hr. Power outage protection flash de-staging cycles: 14

WARNING:  The battery is experiencing a critical failure:
      - Invalid battery pack is detected
      Without a working battery, the system cannot retain data
      during a power outage, which can result in data loss.
      Power down the system and verify that the battery is
      properly installed.
      To ignore this failure and boot the system in a mode
      where data loss might occur, press 'c' followed by 'Enter'
Jul 28 13:48:48 [localhost:callhome.battery.failure:EMERGENCY]: Call home for BATTERY (invalid pack) CRITICAL.
Jul 28 13:48:48 [localhost:nvmem.battery.packInvalid:EMERGENCY]: The incorrect NVMEM battery is installed. Expected part number is 271-00046. To prevent data loss, the system will shut down in 5 minutes.

 

 

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

Scan to view the article on your device