跳转到主内容

升级到 9.6p6 后、在 Intel 10G 以太网 IX1-SFP+ 卡上进行链接

Views:
7
Visibility:
Public
Votes:
0
Category:
fas-systems
Specialty:
hw
Last Updated:

 

适用于

  • Intel 双 10 千兆位以太网 IX1-SFP+ 卡
  • ONTAP 9.6 和 9.7%

问题

  • 在运行 ONTAP 9.6 及更高版本时重新启动后, Intel 10G 以太网 IX1-SFP+ 卡的某些端口会关闭。
  • 在 MULTI_LACP IFGroup 中,这些端口将被降级。
  • 关闭 / 打开节点电源后问题仍然存在。
  • sysconfig -a”的输出示例。在第二个端口中, ifgroup 将更改为 "Partied" (部分)、并关闭一个端口。任何其它端口仍可以正常工作、即使在同一个卡中:

slot 3: Dual 10 Gigabit Ethernet Controller IX1-SFP+
e3a MAC Address:    90:e2:ba:d4:5d:bc (auto-unknown-fd-down)
e3b MAC Address:    90:e2:ba:d4:5d:bd (auto-unknown-fd-down) 

slot 3: Dual 10 Gigabit Ethernet Controller IX1-SFP+
e3a MAC Address:    90:e2:ba:d8:0d:00 (auto-unknown-fd-down)
e3b MAC Address:    90:e2:ba:d8:0d:01 (auto-10g_sr-fd-up)

  • ifconfig”的输出示例、端口不报告载波。 
 e3a: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 9000 options=6c07bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,TSO6,LRO,VLAN_HWTSO,LINKSTATE,RXCSUM_IPV6,TXCSUM_IPV6> ether 90:e2:ba:d4:63:30 hwaddr 90:e2:ba:d4:63:30 media: Ethernet autoselect (autoselect <full-duplex>) status: no carrier

 

CUSTOMER EXCLUSIVE CONTENT

Registered NetApp customers get unlimited access to our dynamic Knowledge Base.

New authoritative content is published and updated each day by our team of experts.

Current Customer or Partner?

Sign In for unlimited access

New to NetApp?

Learn more about our award-winning Support