跳转到主内容

SP 重新启动后, "system node service-processor " 将显示降级状态

Views:
89
Visibility:
Public
Votes:
2
Category:
fas-systems<a>FAS8060</a><a>2008661216</a>
Specialty:
hw
Last Updated:

适用场景

  • FAS8020
  • FAS8040
  • FAS2620
  • FAS2650
  • FAS8200
  • Data ONTAP 9
  • Data ONTAP 8

问题描述

  • 重新启动服务处理器( SP )后, SP 将更改为已降级状态。

集群:: * > system node service-processor reboot-sp -node *

Note: If your console connection is through the SP, it will be disconnected.
    Do you want to reboot the SP ? {y|n}: y
2 entries were acted on.

Cluster::*> 
Cluster::*> system node service-processor 
   autosupport image     network    reboot-sp   show     snmp

Cluster::*> system node service-processor show
                IP       Firmware
Node      Type Status    Configured   Version   IP Address
------------- ---- ----------- ------------ --------- -------------------------
node-1  SP   rebooting   false     3.0.2    -
node-2  SP   rebooting   false     3.0.2    -

Cluster::*> system node service-processor show
                IP       Firmware
Node      Type Status    Configured   Version   IP Address
------------- ---- ----------- ------------ --------- -------------------------
node-1  SP   online    false     3.0.2    -
node-2  SP   rebooting   false     3.0.2    -

Cluster::*> system node service-processor show
                IP       Firmware
Node      Type Status    Configured   Version   IP Address
------------- ---- ----------- ------------ --------- -------------------------
node-1  SP   online    false     3.0.2    -
node-2  SP   unknown    false     3.0.2    -

Cluster::*> system node service-processor show
                IP       Firmware
Node      Type Status    Configured   Version   IP Address
------------- ---- ----------- ------------ --------- -------------------------
node-1  SP   online    false     3.0.2    -
node-2  SP  degraded  true      3.0.2    0.0.0.0

Cluster::> sp   ervice-p r processor show
  (system node service-processor show)
                IP       Firmware
Node      Type Status    Configured   Version   IP Address
------------- ---- ----------- ------------ --------- -------------------------
node-1  SP   online    false     3.0.2    -
node-2  SP  offline   true      3.0.2    0.0.0.0

  • "node-1" 开始接管,因为node-2" 的 SP 脱机。

Cluster::> Feb 20 09:53:59 [node-2:monitor.shutdown.emergency:EMERGENCY]: Emergency shutdown: Environmental Reason Shutdown (SP IPMI Dead
Waiting for PIDS: /usr/sbin/ypbind 729.
Waiting for PIDS:  695.
Terminated
.
Uptime: 28d13h49m5s
System powering down...
System halting...
BIOS version: 9.3
Portions Copyright (c) 2011-2014 NetApp. All Rights Reserved
Waiting for SP ...
SP failure. Resetting SP from primary FW. This can take a few minutes
Waiting for SP ...
SP failure. Resetting SP from backup FW. This can take a few minutes
Waiting for SP ...
Failed to recover SP
IPMI PCI Slot Control failed.
IPMI:Get controller FRU inventory:failed
Phoenix SecureCore Tiano(TM)
Copyright 1985-2021 Phoenix Technologies Ltd.
All Rights Reserved

Build Date: 12/02/2014
**********************************************
*           9.3            *
*    ==================================    *
*       PHOENIX SC-T 2009-2021       *
**********************************************
CPU = 1 Processor(s) Detected, Cores per Processor = 8
Intel(R) Xeon(R) CPU E5-2658 @ 2.10GHz
32768 MB System RAM Installed
256 KB L2 Cache
System BIOS shadowed
Video BIOS shadowed
USB Device: MICRON eUSB DISK

Boot Loader version 5.3 
Copyright (C) 2000-2003 Broadcom Corporation.
Portions Copyright (C) 2002-2014 NetApp, Inc. All Rights Reserved.

BIOS POST Failure(s) detected: SP IPMI failure. Abort AUTOBOOT

  • 拔下并重新插入 ""node-2无法清除此错误。

LOADER-B> BIOS version: 9.3
Portions Copyright (c) 2011-2014 NetApp. All Rights Reserved
Waiting for SP ...
SP failure. Resetting SP from primary FW. This can take a few minutes
Waiting for SP ...
SP failure. Resetting SP from backup FW. This can take a few minutes
Waiting for SP ...
Failed to recover SP
IPMI PCI Slot Control failed.
IPMI:Get controller FRU inventory:failed
Phoenix SecureCore Tiano(TM)
Copyright 1985-2021 Phoenix Technologies Ltd.
All Rights Reserved

Build Date: 12/02/2014
**********************************************
*           9.3            *
*    ==================================    *
*       PHOENIX SC-T 2009-2021       *
**********************************************
CPU = 1 Processor(s) Detected, Cores per Processor = 8
Intel(R) Xeon(R) CPU E5-2658 @ 2.10GHz
32768 MB System RAM Installed
256 KB L2 Cache
System BIOS shadowed
Video BIOS shadowed
USB Device: MICRON eUSB DISK

Boot Loader version 5.3 
Copyright (C) 2000-2003 Broadcom Corporation.
Portions Copyright (C) 2002-2014 NetApp, Inc. All Rights Reserved.

BIOS POST Failure(s) detected: SP IPMI failure. Abort AUTOBOOT

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.