跳转到主内容

ifgrp 上甚至网络端口都发生 " 所有路径关闭 " 以物理方式连接

Views:
15
Visibility:
Public
Votes:
0
Category:
fas-systems
Specialty:
hw
Last Updated:

适用于

  • ONTAP 9.3P7
  • FAS2520

问题

  • 网络端口已物理链接,但 ifgrp : a0a ( e0a , e0b , e0c , e0e )上发生 " 所有路径已关闭 " 。
  • 连接到 e0a 和 e0b 端口的交换机端会重复报告链路关闭 / 启动事件。
  • 从 e0a 和 e0b 端口拔出缆线后, e0c 和 e0e 端口的 Ifgrp a0a 工作正常。

  示例: 

slot 0: Gigabit Ethernet Controller 82580
      e0a MAC Address:    00:a0:98:7c:xx:xx (auto-1000t-fd-up)
      e0b MAC Address:    00:a0:98:7c:xx:xx (auto-1000t-fd-up)
      e0M MAC Address:    00:a0:98:7c:xx:xx (auto-1000t-fd-up)
      e0P MAC Address:    00:a0:98:7c:xx:xx (auto-1000t-fd-up)
      Device Type:        150E
      Firmware Version:   3.22 0x80000101
   slot 0: 1/10 Gigabit Ethernet Controller IX2-T
      e0c MAC Address:    00:a0:98:7c:xx:xx (auto-1000t-fd-up)
      e0d MAC Address:    00:a0:98:7c:xx:xx (auto-100tx-fd-up)
      e0e MAC Address:    00:a0:98:7c:xx:xx (auto-1000t-fd-up)
      e0f MAC Address:    00:a0:98:7c:xx:xx (auto-100tx-fd-up)

IFGRPS.XML

Node filer
Interface Group Name   a0a
Distribution Function    ip
Create Policy multimode_lacp
Port Participation full
Network Ports e0a e0b e0c e0e
Up Ports e0a e0b e0c e0e

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

Scan to view the article on your device