跳转到主内容

什么是 watchdog Timer ?

Views:
58
Visibility:
Public
Votes:
0
Category:
e-series-systems
Specialty:
esg
Last Updated:

可不使用  

适用于

  E 系列 

问题解答

watchdog 计时器

  • watchdog 计时器是一种软件计时器,用于检测死锁情况并从中恢复。
  • 当 Watchdog 计时器触发时,它会通过启动控制器重置来中断控制器处理器。

放置或重置 watchdog 设备

  • 固件中的中断服务例程必须在一段短时间内响应并执行相应操作来调整或重置监视程序硬件。
  • 如果未进行置零,则 watchdog 计时器将强制对控制器进行硬重置(类似于 sysReboot )。
  • 重置后,固件会报告控制器已通过 watchdog 计时器重置,并显示以下消息:

WARNING: Restart by watchdog time out

光纤通道

  • 由于没有与 scsi-bus-reset 等效的设置,因此为光纤通道启用了 watchdog 计时器。
  • 如果在大约 5-10 秒钟内没有提供光纤信道中断服务,看门狗计时器将重置控制器。
  • 当主机处于非活动状态时、阵列控制器会生成自己的中断来覆盖计时器。

watchdog 计时器的优势

  • 监视程序计时器可保护系统免受软件挂起的影响。
  • 它提供了一种自动检测和解决错误的方法。
  • 当 watchdog timer ticks down to 0 时,系统将触发系统重置。
  • 通过 watchdog 计时器,可以在软件挂起时自动恢复,因此无需管理员干预。

其他信息

在此处添加您的文本。

 

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.