运行 SANtricity 操作系统 11.60.3 之前版本的 NetApp EF600 报告 " 已超过额定温度 "

最后更新
另存为PDF

Views:: 25

Visibility:: Public

Votes:: 0

Category:: ef-flash-array

Specialty:: esg

Last Updated:

适用于

运行以下操作系统之一的 NetApp EF600 全闪存阵列：

NetApp SANtricity OS 11.60
NetApp SANtricity OS 11.60.1
NetApp SANtricity 操作系统 11.60.1R1
NetApp SANtricity OS 11.60.2

问题

报告以下警报和事件的阵列：

AutoSupport 严重警报 Nominal temperature exceeded
的恢复 Guru 警报 NOMINAL_TEMP_EXCEEDED

示例：
Failure Entry 1: NOMINAL_TEMP_EXCEEDED-Recovery Failure Type Code: 7 Storage array: array1 Component reporting problem: Thermal sensor Status: Nominal temperature exceeded

的严重主要事件日志事件 Event type: 281B

示例：
Date/Time: 2020-02-20 17:14:38 Sequence number: 2416 Event type: 281B Event category: Failure Priority: Critical Description: Nominal temperature exceeded Sense Key/ASC/ASCQ: No Additional Sense Information. The controller has no sense data available for the requesting host and addressed logical unit combination.(0/00/00) Component type: Temperature Sensor Component location: Shelf 10 Logged by: Controller in bay A Tray location (in Hex):a Slot:1

基板管理控制器（ Baseboard Management Controller ， BMC ）温度警报 Upper Non-critical going high

示例：
40e | 02/19/2020 | 23:12:05 | System Event #0xff | Timestamp Clock Sync | Asserted 40f | 02/19/2020 | 23:12:06 | System Event #0xff | Timestamp Clock Sync | Asserted 410 | 02/20/2020 | 17:11:58 | Temperature #0x1d | Upper Non-critical going high 411 | 02/20/2020 | 17:12:00 | Temperature #0x1d | Upper Non-critical going high