跳转到主内容

E系列控制器处于锁定状态、并显示以下7段代码:PCI device not accessible

Views:
6
Visibility:
Public
Votes:
0
Category:
e-series-santricity-os-controller-software<a>2009年173354</a>
Specialty:
esg
Last Updated:

适用场景

  • NetApp E系列E2700
  • SANtricity 8.30

问题描述

控制器会使用的7段代码锁定。通过串行连接登录到控制器 exclog 时、日志报告:

Unexpected PCI bus width x0 for BDF[1,9,0] TRIGGERING LOCKDOWN.

Unexpected PCI bus speed x1 for BDF[1,9,0] TRIGGERING LOCKDOWN.

PCI DEVICE 0 NOT FOUND: Host-side Fibre Device=0 Function=0 ClassCode=0xc0400

ParentBridge=PLX PCI-E Bridge to Host Card Port 0 TRIGGERING LOCKDOWN.

PCI DEVICE NOT ACCESSIBLE: Host-side Fibre Device=0 Function=0 ClassCode=0xc0400

ParentBridge=PLX PCI-E Bridge to Host Card Port 0

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.