跳转到主内容

如何对E系列回写缓存强制禁用警报进行故障排除

Views:
46
Visibility:
Public
Votes:
1
Category:
e-series-systems
Specialty:
esg
Last Updated:

适用场景

NetApp E 系列

问题描述

本文介绍操作步骤 如何对E系列系统上的"强制禁用回写缓存"进行故障排除。

已在一个或多个卷上禁用回写缓存。出现此问题的原因如下:

  • 电池故障
  • 电池电量低于最小容量
  • 控制器的缓存大小不同
  • 缓存重新配置
  • 正在执行缓存数据还原操作、此操作会中断正常的回写缓存过程
  • 缓存备份设备中的空间不足以存储缓存
  • 内存奇偶校验错误
  • 单工配置—无法镜像缓存

重要注意事项

  • 如果在配置卷时启用了回写缓存、则回写缓存可提高I/O性能。禁用回写缓存后、系统将进入直写模式、这意味着I/O将在写入磁盘后得到确认、而不是在写入缓存时得到确认。在这种情况下、卷或卷组的I/O性能可能会根据驱动器的不同而严重下降。
  • 此错误会触发严重事件。
  • 控制器处于通知状态。启用回写缓存后、在还原配置为使用回写缓存的所有卷后、系统将从通知过渡到最佳状态。
  • 当系统从"已通知"过渡到"最佳"时、系统会记录一个信息MEL事件、以显示系统中所有卷的所有正常回写缓存功能均已还原。
  • 在通知状态下、在任何其他卷上强制禁用写入缓存不会产生任何影响、也不会发生状态过渡。 

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.