跳转到主内容

在启动期间,控制器在 7 段显示器上显示 0F 更换

Views:
33
Visibility:
Public
Votes:
0
Category:
not set
Specialty:
esg
Last Updated:

适用于

控制器: E27XX

固件版本: 08.20.05.00

问题

在更换控制器期间,新控制器不会启动,并且在 7 段显示器上显示 0F 。

正在执行双控制器更换。存储系统中更换的第一个控制器工作正常,没有任何问题。更换第二个控制器后,它将锁定,并在 7 段显示器中显示 0F 。在初始启动过程中,不会显示任何错误。excLogShowSTATE_CAPTURE支持包中文件的输出显示以下错误:

Unexpected PCI bus width x0 for BDF[1,9,0] TRIGGERING LOCKDOWN.

Unexpected PCI bus speed x1 for BDF[1,9,0] TRIGGERING LOCKDOWN.

 

PCI DEVICE 0 NOT FOUND: Host-side Fibre Device=0 Function=0 ClassCode=0xc0400

ParentBridge=PLX PCI-E Bridge to Host Card Port 0 TRIGGERING LOCKDOWN.

 

PCI DEVICE NOT ACCESSIBLE: Host-side Fibre Device=0 Function=0 ClassCode=0xc0400

ParentBridge=PLX PCI-E Bridge to Host Card Port 0

 

PCI DEVICE 0 NOT FOUND: Host-side Fibre Device=0 Function=1 ClassCode=0xc0400

ParentBridge=PLX PCI-E Bridge to Host Card Port 0 TRIGGERING LOCKDOWN.

 

PCI DEVICE NOT ACCESSIBLE: Host-side Fibre Device=0 Function=1 ClassCode=0xc0400

ParentBridge=PLX PCI-E Bridge to Host Card Port 0

 

PCI DEVICE 2 NOT FOUND: iSCSI Ethernet Device=0 Function=2 ClassCode=0x20000

ParentBridge=PLX PCI-E Bridge to Host Card Port 0 TRIGGERING LOCKDOWN.

 

PCI DEVICE NOT ACCESSIBLE: iSCSI Ethernet Device=0 Function=2 ClassCode=0x20000

ParentBridge=PLX PCI-E Bridge to Host Card Port 0

 

PCI DEVICE 2 NOT FOUND: iSCSI Ethernet Device=0 Function=3 ClassCode=0x20000

ParentBridge=PLX PCI-E Bridge to Host Card Port 0 TRIGGERING LOCKDOWN.

 

PCI DEVICE NOT ACCESSIBLE: iSCSI Ethernet Device=0 Function=3 ClassCode=0x20000

ParentBridge=PLX PCI-E Bridge to Host Card Port 0

 

PCI DEVICE 0 NOT FOUND: Host-side iSCSI Device=0 Function=4 ClassCode=0x28000

ParentBridge=PLX PCI-E Bridge to Host Card Port 0 TRIGGERING LOCKDOWN.

 

PCI DEVICE NOT ACCESSIBLE: Host-side iSCSI Device=0 Function=4 ClassCode=0x28000

ParentBridge=PLX PCI-E Bridge to Host Card Port 0

 

PCI DEVICE 0 NOT FOUND: Host-side iSCSI Device=0 Function=5 ClassCode=0x28000

ParentBridge=PLX PCI-E Bridge to Host Card Port 0 TRIGGERING LOCKDOWN.

 

PCI DEVICE NOT ACCESSIBLE: Host-side iSCSI Device=0 Function=5 ClassCode=0x28000

ParentBridge=PLX PCI-E Bridge to Host Card Port 0

 

安装更换的 HIC 或使用两个额外的备用控制器无法解决此问题。

 

请致电 NetApp 技术支持并提及此文章以获得帮助。

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

Scan to view the article on your device