跳转到主内容

VSC 为 VMware 所做的哪些设置要求重新引导 ESX 主机才能生效?

Views:
25
Visibility:
Public
Votes:
0
Category:
virtual-storage-console-for-vmware-vsphere
Specialty:
nfs
Last Updated:

适用于

FlexPod

解答

适用于 VMware 的虚拟存储控制台( VSC )具有一项功能、可以在与 VMware 注册的 vCenter 相连的任何或所有 ESX 主机上为 NetApp 建议的 NFS 、 MPIO 和 HBA 设置分配值。但是,要使某些 NFS 和 HBA 设置生效、必须重新引导 ESX 主机。

下面给出了设置。需要重新引导的设置用星号 (*) 标识。

NFS 设置

  • Net.TcpipHeapSize *   
  • Net.TcpipHeapMax *
  • NFS.MaxVolumes
  • NFS.HeartbeatMaxFailures
  • NFS.HeartbeatFrequency
  • NFS.HeartbeatTimeout

MPIO 设置

  • PSP changes:对于启用了 ALUA 的 ESX 4.0+ FC 路径,设置为 RR (循环)。对于所有其他配置,设置为 FIXED。
  • ALUA:在控制器上的 IGroup 中设置。ESX 将无法查看该信息、直到主机重新启动。

适配器设置

  • Disk.QFullSampleSize
  • Disk.QFullThreshold
  • Emulex FC HBA timeouts *
  • QLogic FC HBA timeouts *
  • QLogic iSCSI HBA timeouts *

其他信息

不适用

 

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.