跳转到主内容

为什么 " 卷已满 " 不触发 SNMP 陷阱事件?

Views:
6
Visibility:
Public
Votes:
0
Category:
ontap-9
Specialty:
core
Last Updated:

适用场景

  • ONTAP 9
  • SNMP 陷阱

问题解答

  • EMS 显示 monitor.volume.full为卷使用或预留 98% 的空间。
[Hostname: wafl_spcd_main: monitor.volume.full:debug]: Volume vol1@vserver:92ba4446-f4ac-11e9-872e-00a098f9bb53 is full (using or reserving 98% of space and 28% of inodes).
 
请参见 TR-4220。ONTAP monitor.volume.full会向陷阱主机发送 SNMP 陷阱事件。此时将生成以下 EMS 消息:
monitor.volume.full 
  • 但是,如果卷的已用空间始终超过 98% , monitor.volume.full则无法生成相同的空间,因此 ONTAP 不能 monitor.volume.full对陷阱主机具有相同的 SNMP 陷阱事件。
  • 当卷的已用空间减少到 98% 以下,然后增加到 98% 时, EMS 会显示 monitor.volume.full.当卷再次使用或预留 98% 的空间时, ONTAP monitor.volume.full会再次向陷阱主机发送 SNMP 陷阱事件。
NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.