跳转到主内容

NetApp_Insight_2020.png 

“忽略不一致设置”为“开”意味着什么?

Views:
6
Visibility:
Public
Votes:
0
Category:
data-ontap-8
Specialty:
core
Last Updated:

可不使用  

适用于

  • Data ONTAP 7 及更早版本
  • Data ONTAP 8
  • ONTAP 9

解答

 

  • 如果将此值设置为 on 、 Data ONTAP 将忽略存在或可能出现的任何文件系统不一致性。
  • 如果设置为 On (开),请联系 NetApp 技术支持以解决此问题。
  • 如果这会影响您的系统,请检查 Active IQ
  • 要通过 CLI 进行检查,请运行以下命令:

::>storage aggregate show -aggregate <aggr>

 

  • 示例:

filer::> storage aggregate show -aggregate aggr0

                                         Aggregate: aggr0
                                    Checksum Style: block
                                   Number Of Disks: 3
                                            Mirror: false
                                              Node: filer
                              Disks for First Plex: 1.21.0, 1.21.1, 1.21.3
                           Disks for Mirrored Plex: -
                         Partitions for First Plex: -
                      partitions for Mirrored Plex: -
                           Free Space Reallocation: off
                                         HA Policy: cfo
                               Ignore Inconsistent: on
                Space Reserved for Snapshot Copies: 5%
           Aggregate Nearly Full Threshold Percent: 97%
                  Aggregate Full Threshold Percent: 98%
                         Block Checksum Protection: on

 

其他信息

对于以 7 模式运行的 Data ONTAP ,请运行 aggr status命令检查状态。