跳转到主内容

NetApp_Insight_2020.png 

"ACP.Command.Connect" 消息的含义是什么?

Views:
6
Visibility:
Public
Votes:
0
Category:
ontap-9
Specialty:
core
Last Updated:

适用于

  • ONTAP 9.1 P20

解答

示例:

[xxx@xxx:acp.command.connect:debug]: Could not establish connection with 192.168.1.115

更正操作是验证 ACP 连接。

  • 此消息会在调试级别报告,不会影响 SAS 数据传输。
  • 要确认哪个模块正在使用<IP_address of ACP>,请执行 "storage shelf acp module show -instance " 命令。

示例:

Culster::> storage shelf acp module show -instance

                        Node: fas8080-dal-1
                 Module Name: 1.2.B
                Adapter Name: 0b
                 MAC Address: 00:a0:98:20:51:72
                    IOM Type: iom6
         Shelf Serial Number: 9401812119
                  IP Address: 192.168.1.115
            Protocol Version: 1.2.02.10
            Firmware Version: 02.10
                 Assigner ID: 536940649
                       State: active
                Last Contact: 556
           Power Cycle Count: 0
             Power Off Count: 0
              Power On Count: 0
        Expander Reset Count: 0
  Expander Power Cycle Count: 0

  • 通过执行 "storage shelf acp configure -is-enabled false " 命令禁用 ACP ,可以禁止显示此消息。

默认值 "-is-enabled " 为true

其他信息