Coming soon...New Support-Specific categorization of Knowledge Articles in the NetApp Knowledge Base site to improve navigation, searchability and your self-service journey.

主页
建议和故障排除
数据存储软件
ONTAP OS
升级到 Data ONTAP 8.3 而不禁用 32 位数据支持会导致启动时出错

升级到 Data ONTAP 8.3 而不禁用 32 位数据支持会导致启动时出错

最后更新
另存为PDF

Views:: 13

Visibility:: Public

Votes:: 0

Category:: data-ontap-8

Specialty:: core

Last Updated:

适用于

Data ONTAP 8.3

问题

在升级到集群模式 Data ONTAP 8.3 时，节点在重新启动后暂停，并显示 32 位错误消息：
- 示例：
  ALERT:
  The currently running image on this node contains obsolete capabilities which are in use by the cluster. These capabilities must be disabled cluster-wide using the following per-capability instructions before this node can boot:
  format_32bit: You must remove all 32-bit data from the cluster and disable the 32-bit aggregate support using "storage aggregate 64bit-upgrade 32bit-disable" command (privilege advanced).
- 注意：
  - Storage aggregate 64bit-upgrade 32bit-disable -force 只能在 Data ONTAP 8.2.x 中使用
  - 如果存储系统已升级到 Data ONTAP 8.3 ，则会显示以下错误：
    storage aggregate 64bit-upgrade 32bit-disable –force” command is unrecognized。