命令 "network port ifgrp show" 的输出将显示其中一个端口的 "Port Participation ： partial"

最后更新
另存为PDF

Views:: 17

Visibility:: Public

Votes:: 0

Category:: ontap-9

Specialty:: network

Last Updated:

适用场景

ONTAP 9
LACP
网络交换机

问题描述

命令 "network port ifgrp show" " 的输出将显示Port Participation: partial其中一个端口的 ""
从 LACP 协议的数据包中的数据包跟踪中，我们可以看到以下标志：

 Link Aggregation Control Protocol LACP Version: 0x01 TLV Type: Actor Information (0x01) TLV Length: 0x14 Actor System Priority: 32768 Actor System ID: HewlettP_24:e4:83 (d8:94:03:xx:yy:zz) <------ this is the MAC address of the switch Actor Key: 5 Actor Port Priority: 32768 Actor Port: 41 Actor State: 0x01, LACP Activity .... ...1 = LACP Activity: Active .... ..0. = LACP Timeout: Long Timeout .... .0.. = Aggregation: Individual <------------------------------------------------------------ .... 0... = Synchronization: Out of Sync ...0 .... = Collecting: Disabled ..0. .... = Distributing: Disabled .0.. .... = Defaulted: No 0... .... = Expired: No