跳转到主内容

启动期间发生崩溃未创建核心转储

Views:
1
Visibility:
Public
Votes:
0
Category:
ontap-9
Specialty:
core<a>2008997310</a>
Last Updated:

适用场景

  • ONTAP 9.8p6
  • AFF A700

问题描述

升级到 ONTAP 9.8p6 时,在启动过程中发生系统崩溃,但它不会生成核心文件。
 
 
Please choose one of the following:
 
 
(1) Normal Boot.
(2) Boot without /etc/rc.
(3) Change password.
(4) Clean configuration and initialize all disks.
(5) Maintenance mode boot.
(6) Update flash from backup config.
(7) Install new software first.
(8) Reboot node.
(9) Configure Advanced Drive Partitioning.
(10) Set Onboard Key Manager recovery secrets.
(11) Configure node for external key management.
Selection (1-11)? 1
Pensando Offload Driver, ver 1.4.0-E-78
Pensando Ethernet NIC Driver, ver: 1.4.0-E-96
ionic_rdma ver 1.4.0-E-96 : Pensando RoCE HCA driver
e1a: mlx5e_set_board_type port_name = e1a port_psid = NAP0000002006, device_id = 0x1017, vendor_id = 0x15b3
e1b: mlx5e_set_board_type port_name = e1b port_psid = NAP0000002006, device_id = 0x1017, vendor_id = 0x15b3
e10a: mlx5e_set_board_type port_name = e10a port_psid = NAP0000002006, device_id = 0x1017, vendor_id = 0x15b3
e10b: mlx5e_set_board_type port_name = e10b port_psid = NAP0000002006, device_id = 0x1017, vendor_id = 0x15b3
Dec 01 22:00:54 [FSA700-4B:discover.6500.unsupported:notice]: FC-to-SAS bridge ATTO 6500N discovery is disabled.
PANIC : page fault (supervisor read data, page not present) on VA 0x88 cs:rip 0x20:0xffffffff806ce644 rflags 0x10246
version: 9.8P6: Tue Aug 3 12:23:18 EDT 2021
conf : x86_64.optimize
cpuid = 1
KDB: stack backtrace:
vpanic() at vpanic+0x70d/frame 0xfffff700000071f0
panic() at panic+0x43/frame 0xfffff70000007250
amd64_syscall() at amd64_syscall+0x116e/frame 0xfffff700000072c0
trap() at trap+0xb95/frame 0xfffff70000007330
trap() at trap+0x1c0/frame 0xfffff70000007440
calltrap() at calltrap+0x8/frame 0xfffff70000007440
--- trap 0xc, rip = 0xffffffff806ce644, rsp = 0xfffff70000007510, rbp = 0xfffff70000007510 ---
device_get_softc() at device_get_softc+0x4/frame 0xfffff70000007510
qla_sysconfig_detail() at qla_sysconfig_detail+0x11e/frame 0xfffff70000007620
qla_get_config() at qla_get_config+0x34/frame 0xfffff70000007650
kmod_pci_info_nic() at kmod_pci_info_nic+0xd5/frame 0xfffff700000076a0
kern_ethernet_controller_info_init() at kern_ethernet_controller_info_init+0x133/frame 0xfffff70000009870
sysinit_thread() at sysinit_thread+0x1ab/frame 0xfffff70000009a60
fork_exit() at fork_exit+0xc7/frame 0xfffff70000009ab0
fork_trampoline_sk() at fork_trampoline_sk+0xe/frame 0xfffff70000009ab0
--- trap 0, rip = 0, rsp = 0, rbp = 0 ---
Uptime: 3m7s
ahcich0: AHCI reset done: devices=00000001
Dumper is not yet registered. A coredump will not be available at this time.
System halting...
BIOS Version: 10.11

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

Scan to view the article on your device