跳转到主内容

ONTAP 无法初始化,并显示 BOOTMGR 错误

Views:
9
Visibility:
Public
Votes:
0
Category:
ontap-9
Specialty:
core
Last Updated:

适用场景

ONTAP 9

问题描述

在尝试初始化新的 ONTAP HA 对或重新利用现有 HA 对时,会生成类似以下内容的错误:

AutoPartAFFDetermination: total_disks: 12 num_internal_disks: 0 num_ssds: 12 num_unknowns: 0 num_mediator_disks: 0 num_not_supported: 0 all_ssd? true
AutoPartDiskScan: CandidateDisks: 12 UsableDisks: 12 LocalDisks: 0 UnusableSSDs: 0 PartitionMethod: Root+Data1+Data2
AutoPartDistributionCheck: LocalExpected: 6 PartnerExpected: 6 CandidateDisks: 12 LocalAssigned: 0 NotYetAssigned: 12
AutoPartRootConfig: root d+p+s=3+2+1, root aggr size=112958795 (blks) per 3 disks, root partition size=37660227 (blks)
AutoPartRequestedDiskAssignment: DiskMaxCount: 12 CksumType: block Pool: 0 RPM: 50000 DiskType: SSD
AutoPartInfo: Disks may be from internal or external shelf

AdpInit: Root will be created with 6 disks with configuration as (3d+2p+1s) using disks of type (SSD).
bootarg.bootmenu.selection is |4|
AdpInit: System will now perform initialization using option 4

BOOTMGR: The system has 0 disks assigned whereas it needs 6 to boot, will try to assign the required number.
sanown_assign_X_disks: init boot assign with half shelf policy
Jun 01 11:27:07 [localhost:diskown.hlfShlf.assignStatus:notice]: Half shelf based automatic disk assignment is "enabled".
sanown_split_shelf_resv_lock_disk: msg success op: RESERVE lock disk:  status: 0
BOOTMGR: If the disk shelves are partially populated,
Follow best practice guidelines to populate disks in the right slots

sanown_split_shelf_resv_lock_disk: msg success op: RELEASE lock disk:  status: 0
BOOTMGR: already_assigned=0, min_to_boot=6, num_assigned=0
BOOTMGR: Assigned 0 out of 6 disks requested
fm_run0: no local disks found & OFW channel is not up.

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

Scan to view the article on your device