如果节点暂停并显示-power-off true且无错误输出、则节点将启动到LOADER

最后更新
另存为PDF

Views:: 3

Visibility:: Public

Votes:: 0

Category:: ontap-9

Specialty:: core

Last Updated:

适用场景

ONTAP 9

问题描述

暂停两个节点至LOADER并确认两个电源状态均为OFF：

Cluster::> system halt -node * -inhibit-takeover true -skip-lif-migration-before-shutdown true -power-off true

Warning: Are you sure you want to power off node "Cluster-01"? {y|n}: y

Warning: Are you sure you want to power off node "Cluster-02"? {y|n}: y 2 entries were acted on.

BMC> system power status Host power is off

节点重新启动后、即使启用了自动启动、它也会启动到LOADER、并且控制台日志没有错误输出：

LOADER-A> printenv

Variable Name Value -------------------- -------------------------------------------------- ARCH X86_64 AUTOBOOT true AUTOBOOT_FROM PRIMARY

控制台没有错误输出、节点可以通过从LOADER正常启动 boot_ontap：

Wait BMC self-test result. BMC self-test: OK. UPI initialization. CPU initialization. Running full memory initialization. CPU reset. BIOS Version: 16.6 PEI start. CPU PEI initialization. Wait BMC self-test result. BMC self-test: OK. UPI initialization. CPU initialization. Running full memory initialization. SPI FLASH: Primary BIOS PEI end. DXE start. USB initialization. PCI host bridge initialization. CSM initialization. PCI Bus initialization start. BDS start. Console output devices connect. Version 2.20.1276. Copyright (C) 2021 American Megatrends, Inc. BIOS Date: 09/15/2021 14:57:57 Ver: 16.6

Press <DEL> or <ESC> to enter setup. Press <F7> to enter Boot Menu.

[System Information] CPU = 2 Processors DetectedCPU 0 : Intel(R) Xeon(R) Silver 4210 CPU @ 2.20GHz Core : 10CPU 1 : Intel(R) Xeon(R) Silver 4210 CPU @ 2.20GHz Core : 10Memory Size : 147456 MB

Ready to boot.

ACPI RSDP Found at 0x6cc33000 LOADER-A> boot_ontap