跳转到主内容

NetApp_Insight_2020.png 

升级到 ONTAP 9.3 后、 LACP IfGRP 端口参与更改为“部分”

Views:
9
Visibility:
Public
Votes:
0
Category:
ontap-9
Specialty:
network
Last Updated:

适用于

ONTAP 9.3p2ONTAP
9.3p4ONTAP
9.3p5ONTAP
9.3p6 

问题

  • 升级到 ONTAP 9.3 后、 LACP Ifgrp 显示其中一个端口的部分参与情况:

::*> ifgrp show -node node01 -ifgrp a0a
                 Node: node01
Interface Group Name: a0a
Distribution Function: ip
        Create Policy: multimode_lacp
          MAC Address: 92:xx:xx:xx:xx:xx
   Port Participation: partial
        Network Ports: e0c, e0d
             Up Ports: e0c
           Down Ports: e0d

  • 当我们更改为静态多模式 Ifgrp 时不会出现此问题:

通过多模式端口可以充分参与:    
::*> ifgrp show -node node01 -ifgrp a0a
                 Node: node01
Interface Group Name: a0a
Distribution Function: ip
        Create Policy: multimode
          MAC Address: 92:xx:xx:xx:xx:xx
   Port Participation: full
        Network Ports: e0c, e0d
             Up Ports: e0c, e0d
           Down Ports: -  

  • 此问题仅在 CNA 卡 8324 中出现:   

slot 0: 1G/10G Ethernet Controller CNA EP 8324
(Dual-port, QLogic CNA 8324(8362) rev. 2)
e0c MAC Address:    92:e2:ba:b9:da:9c (auto-10g_sr-fd-up)
e0d MAC Address:    92:e2:ba:b9:da:9c (auto-10g_sr-fd-up)
Device Type:        EP8324N
Firmware Version:   5.4.66.0    

  • 交换机端配置没有变化、端口也在物理上处于启用状态。

 

CUSTOMER EXCLUSIVE CONTENT

Registered NetApp customers get unlimited access to our dynamic Knowledge Base.

New authoritative content is published and updated each day by our team of experts.

Current Customer or Partner?

Sign In for unlimited access

New to NetApp?

Learn more about our award-winning Support