跳转到主内容

如何在同一文件管理器中将 vFiler 从一个卷移到另一个卷?

Views:
20
Visibility:
Public
Votes:
0
Category:
data-ontap-7
Specialty:
7dot
Last Updated:

适用场景

  • MultiStore/vFiler
  • Data ONTAP 7及更早版本

问题解答

您可以使用SnapMirror (卷SnapMirror® (VSM)或qtree SnapMirror® (QSM))和ndmpcopy将vFiler单元从源移动到目标、并在同一文件管理器中执行以下操作:

原始vfiler配置如下:

fas3020cl1> vfiler status -r

vf1 running
ipspace: default-ipspace
IP address: 10.61.84.32 [unconfigured]
Path: /vol/org/qt [/etc]
UUID: 908bd298-0d18-11de-9592-00a09809694e
fas3020cl1>

此处名为的vfiler vf1 驻留在路径上 /vol/org/qt

要将此vfiler vf1 移至其他卷、请执行以下步骤:

  1. qtree snapmirror /vol/org/qt /vol/new/qt

    注意: 目标qtree名称应与原始名称相同。稍后、我们会将目标卷名称也更改为原始卷名称。

  2. Vfiler stop vf1
  3. vfiler destroy vf1
  4. vol rename org old
  5. vol rename new org
  6. vfiler create vf1 -r /vol/org/qt
  7. vfiler run vf1 setup

例如:

fas3020cl1> vfiler status -r
vfiler0 running
ipspace: default-ipspace
IP address: 10.61.84.30 [e0a]
Path: / [/etc]
UUID: 00000000-0000-0000-0000-000000000000

vf1 running
ipspace: default-ipspace
IP address: 10.61.84.32 [unconfigured]
Path: /vol/org/qt [/etc]
UUID: 908bd298-0d18-11de-9592-00a09809694e
fas3020cl1>

fas3020cl1> vol create new aggr0 1g

fas3020cl1> snapmirror initialize -S /vol/org/qt /vol/new/qt <<< Make sure the destination qtree name is same as source.

fas3020cl1> snapmirror quiesce /vol/new/qt

fas3020cl1> snapmirror break /vol/new/qt

fas3020cl1> vfiler stop vf1 <<< This step stops the vfiler running on original volume/qtree

fas3020cl1> vfiler destroy vf1 <<< This step destroys the vfiler running on original volume/qtree

fas3020cl1> vol rename org old <<< Change the original volume to something else.

fas3020cl1> vol rename new org <<< Change the new volume to vfilers original volume name

现在、按如下所示重新创建要从新创建的卷运行的vfiler单元Vf1:

fas3020cl1> vfiler create vf1 -r /vol/org/qt
Sun Mar 8 02:54:45 GMT [fas3020cl1: cmds.vfiler.info:notice]: vFiler unit vf1 restored.
vf1 running
ipspace: default-ipspace
IP address: 10.61.84.32 [unconfigured]
Path: /vol/org/qt [/etc]
UUID: 908bd298-0d18-11de-9592-00a09809694e
Protocols allowed: 7
Allowed: proto=rsh
Allowed: proto=ssh
Allowed: proto=nfs
Allowed: proto=cifs
Allowed: proto=iscsi
Allowed: proto=ftp
Allowed: proto=http
Protocols disallowed: 0
The etc configuration directory for vfiler "vf1" is /vol/org/qt/etc.
The IP addresses of vfiler "vf1" are still unconfigured.
To use these addresses, you must configure them using the
setup command. You can also manually configure addresses
with the ifconfig command and make those settings
persistent by adding the ifconfig command lines to /etc/rc.
fas3020cl1> Sun Mar 8 02:54:45 GMT [fas3020cl1: cmds.vfiler.info:notice]: vFiler unit vf1 initialized.

fas3020cl1>

注意:大多数vfiler配置都将具有多个卷或qtree路径作为其资源。在这种情况下、应执行vfiler assigner、以便在重新创建vfiler时将这些资源从托管vfiler0移动到此vfiler。

追加信息

不适用

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.