跳转到主内容

如何从 Solaris 主机检查 HBA 和链接速度?

Views:
26
Visibility:
Public
Votes:
0
Category:
fas-systems
Specialty:
san
Last Updated:

可不使用  

适用场景

  • Solaris 操作系统
  • SAN 协议

问题解答

  • 使用sanlun fcp show adapter -v <adapter>用于显示有关 HBA 的信息的命令:
 # sanlun fcp show adapter -v lpfc1 lpfc1 WWPN:10000000fedcba98 WWNN: 20000000fedcba98 driver name: lpfc model: LP9002 model description: Emulex LightPulse LP9002 2 Gigabit PCI Fibre Channel Adapter serial number: 0000c92bfe6a hardware version: 2002606d driver version: 5.00e; HBAAPI v1.3, 3-29-02 firmware version: 3.90A7 (C2D3.90A7) Number of ports: 1 port type: Fabric port state: Operational supported speed: 2 GBit/sec negotiated speed: 2 GBit/sec OS device name: /devices/pci@8,700000/fibre-channel@3 

 

  • 对于未安装 Solaris 主机实用程序套件的主机、可以使用以下命令找到类似信息: fcinfo hba-port -l command:
 BA Port WWN: 10000000fedcba98 OS Device Name: /dev/cfg/c3 Manufacturer: Emulex Model: LPe12002-S Firmware Version: 1.00a12 (U3D1.00A12) FCode/BIOS Version: Boot:5.03a0 Fcode:3.01a1 Serial Number: 4925382+12450000M8 Driver Name: emlxs Driver Version: 2.90.15.0 (2014.01.22.14.50) Type: N-port State: online Supported Speeds: 2Gb 4Gb 8Gb Current Speed: 4Gb Node WWN: 20000000fedcba98 Link Error Statistics: Link Failure Count: 1 Loss of Sync Count: 144 Loss of Signal Count: 0 Primitive Seq Protocol Error Count: 0 Invalid Tx Word Count: 7770 Invalid CRC Count: 0

追加信息

不适用

 

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.