跳转到主内容

为性能分析收集数据的一般指导ONTAP 7Mode和CDOT

Views:
8
Visibility:
Public
Votes:
0
Category:
ontap-9
Specialty:
perf
Last Updated:

适用场景

  • ONTAP 7模式
  • Cdot

问题描述

本文档为收集数据以进行性能分析提供了一般指导。

数据收集取决于:

  • 需要调查的问题描述 的类型
  • 用于访问数据的协议
  • 基础架构(网络类型)

在某些情况下、必须在多个时间点以及报告的问题描述 的不同阶段收集数据。

例如、如果报告的问题描述 备份过程较慢、或者执行某些涂写所需时间比通常要长、则必须在整个备份过程中以及备份的"正常"时间(备份所用时间不长)收集数据。

持续运行的问题描述 期间收集数据以进行性能分析至关重要、需要通过提供准确的时间戳来记录这些数据。

 有两种主要的数据收集工具:

对于运行 ONTAP 8.3及更高版本系统性能归档 (首选工具)和perfstat

https://kb.netapp.com/Advice_and_Troubleshooting/Data_Storage_Software/ONTAP_OS/Performance_Archives%3A_Performance_first_failure_data_collection_for_Clustered_Data_ONTAP_8.3_and_later

 

对于 7模式 系统: perfstat (版本7.39)

https://kb.netapp.com/Advice_and_Troubleshooting/Data_Storage_Software/ONTAP_OS/FAQ%3A_Perfstat_collection_methods_omnibus

下载链接 :https://mysupport.netapp.com/site/tools/tool-eula/perfstat7

 

有关单次迭代的时间范围(-t参数)、迭代次数(-i)和运行次数的决定可能因问题描述 而异、并且由TSE通过操作计划在问题描述 上工作。

参数-t (收集计数器并将其重新置零的分钟数)在大多数性能故障排除中均设置为5 (5分钟)。

 

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.