跳转到主内容

EMS事件"netif.tcp.conn.bad.checksum"

Views:
29
Visibility:
Public
Votes:
0
Category:
ontap-9
Specialty:
nas
Last Updated:

适用场景

ONTAP 9

问题描述

  • 此时将显示以下EMS消息:
Mon Sep 26 02:09:05 +0900 [node01: kernel: netif.tcp.conn.bad.checksum:error]: TCP packet with bad checksum detected on port e0c. The packet arrived on connection with source address xx.xx.xx.xx and destination_address xx.xx.x.xx.
  • 错误的TCP ksum在中的端口上也在增加 ::> system node run -node node_name -command ifstat port_name

-- interface  e0c  (40 days, 5 hours, 34 minutes, 37 seconds) --
RECEIVE
Total frames:     2047m | Frames/second:     589  | Total bytes:      2625g
Bytes/second:      755k | Total errors:        0  | Errors/minute:       0
...
LRO bytes:        2527g | LRO6 segments:       0  | LRO6 bytes:          0
 Bad UDP cksum:       0  | Bad UDP6 cksum:      0  | Bad TCP cksum:      21
 Bad TCP6 cksum:      0  | Mcast v6 solicit:    0  | Lagg errors:         0
...

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.