跳转到主内容

ONTAP 是否支持从同一个 Windows 服务器通过 FC 和 iSCSI 路径访问同一个 LUN ?

Views:
5
Visibility:
Public
Votes:
0
Category:
ontap-9
Specialty:
san
Last Updated:

适用场景

  • ONTAP 9
  • Windows

问题解答

对于集群模式 Data ONTAP , Data ONTAP DSM 支持通过 FC 和 iSCSI 路径访问同一 LUN 。

对于在 7- 模式下运行的 Data ONTAP , DSM 不支持通过 FC 和 iSCSI 路径访问同一 LUN 。由于 FC 路径需要 ALUA ,而 7- 模式 LUN 的 iSCSI 路径不支持 ALUA 。所有路径都必须具有相同的 ALUA 设置。但是,仍可通过 FC 路径访问某些 7- 模式 LUN ,并通过 iSCSI 路径访问其他 7- 模式 LUN 。

对于 Windows 原生 DSM ,由于 MPIO 发生在 Miniport 驱动程序层之上,因此 MPIO 驱动程序只能看到 SCSI 设备,并且不知道传输协议。这样可以混合使用连接到同一 LUN 的光纤通道和 iSCSI 路径。由于这些协议具有不同的访问特征和性能,因此建议,如果混合使用这些协议,则它们将用于主动 - 被动配置,其中一种协议会在另一种协议发生故障时进行接管。
 
总之,对于集群模式 Data ONTAP , ONTAP 支持通过 FC 和 iSCSI 路径访问同一个 LUN 。如果来自不同的主机,则需要主机级集群像 Windows 集群一样一致地管理 LUN 文件系统。如果此主机来自同一主机,请安全地联系主机操作系统支持部门,以再次确认是否支持此行为的多路径软件。 
 
注意: FC 是指传统光纤通道和以太网光纤通道( FCoE )。

追加信息

 

 

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.