无法从 "cluster - switch show " 命令输出中看到两个集群交换机之一
状态信息
适用场景
- ONTAP 9
- 集群交换机运行状况监视器( CSHM )
问题描述
- 两个集群交换机均正常工作
cluster-switch show
、但无法从命令输出中看到一个集群交换机。 - 在
system cluster-switch show
命令中、只能看到一个交换机信息
示例:
Cluster::> system cluster-switch show -instance
Device Name: switch(XXXXXXXXXXX)
IP Address: xxx.xxx.xxx.xxx
SNMP Version: SNMPv2c
Is Discovered: true
Community String: cshm1!
Model Number: NX5596
Switch Network: cluster-network
Software Version: Cisco Nexus Operating System (NX-OS) Software, Version 7.1(1)N1(1)
Reason For Not Monitoring:
Source Of Switch Version: CDP
Is Monitored ?: true
Serial Number of the Device: Unknown
- 在
cdpd show-neighbors
中、可以同时查看这两个交换机信息。
示例:
Cluster::> run -node * cdpd show-neighbors -v
Remote Device: switch(XXXXXXXXXXX)
Local Port: e4a
Capabilities: Switch, IGMP
Platform: N5K-C5596UP
Remote Port: Ethernet1/1
Version: Cisco Nexus Operating System (NX-OS) Software, Version 7.1(1)N1(1)
Remote Device: switch(XXXXXXXXXXX)
Local Port: e4c
Capabilities: Switch, IGMP
Platform: N5K-C5596UP
Remote Port: Ethernet1/1
Version: Cisco Nexus Operating System (NX-OS) Software, Version 7.1(1)N1(1)
Entry Address(es): xxx.xxx.xxx.xxx
- 事件日志会报告以下警报:
[Node-01: mgwd: callhome.hm.alert.major:alert]: Call home for Health Monitor process cshm: ClusterSwitchMissing_Alert[XXXXXXXXXXXXXXXXX].
[Node-01: mgwd: callhome.hm.alert.major:alert]: Call home for Health Monitor process cshm: SwitchCommunityString_Alert[XXXXXXXXXXXXXXXXX].