跳转到主内容

是否可以将聚合中使用的 FlexArray 后端 LUN 替换为另一个?

Views:
16
Visibility:
Public
Votes:
0
Category:
fas-systems
Specialty:
san
Last Updated:

适用于

  • NetApp FAS/AFF
  • FlexArray 后端

解答

  • 在中使用的 FlexArray 后端阵列 LUN 聚合不能替换为其他 LUN
  • 通常,可以使用 storage disk replace 命令将聚合中使用的磁盘替换为另一个磁盘
  • 冗余数据用于重建源磁盘的数据 到备用磁盘上
  • 新构建的磁盘将取代源 聚合中的磁盘
  • 源磁盘会创建一个备用磁盘
  • 但是,对于 FlexArray 后端 LUN ,聚合通常采用 RAID-0 配置
  • NetApp 端未使用冗余,因为 后端阵列已负责数据保护的冗余
  • 由于聚合中没有冗余,因此 storage disk replace 命令无法运行
  • 如果需要更换聚合中的 LUN ,建议采用更具环状结构的方式
  • 创建新聚合。
  • 使用 vol move 从源移动所有卷 聚合到新聚合
  • 销毁源聚合

其他信息

在此处添加您的文本。

 

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.