跳转到主内容

NetApp_Insight_2020.png 

sensorreadingfailed 警报

Views:
5
Visibility:
Public
Votes:
0
Category:
element-software
Specialty:
solidfire
Last Updated:

适用于

  • NetApp Element 软件
  • NetApp H410s ( H300s 、 H500s 、 H700s )

问题

以下错误可能会出现在 ActiveIQ 中:

  • Error checking sensor for Inlet Temp (10193x)
  • Error checking sensor for FanX RPM (10193x)
  • 受影响节点 sudo 上的 /usr/bin 。 SMC - ipmicfg -sdr 将显示状态而不是 OK Fail status instead of OK
  • 可以从 mNode 运行的备用命令: sudo ipmitool -I lanplus -H <node-BMC-IP-address> -U <BMC-username> -P <BMC-password> sdr)


sfadmin@NODE /usr/bin $ sudo ./smc-ipmicfg -sdr
Status | (#)Sensor         |    Reading | Low Limit | High Limit |
------ | ---------         |    ------- | --------- | ---------- |
 Fail | (4) CPU1 Temp       |      N/A |     N/A |   98C/208F |
 Fail | (71) CPU2 Temp       |      N/A |     N/A |   98C/208F |
 Fail | (138) PCH Temp       |      N/A |   5C/41F |   95C/203F |
 Fail | (205) System Temp     |      N/A |   -5C/23F |   85C/185F |
  ---omitted---

 

 

CUSTOMER EXCLUSIVE CONTENT

Registered NetApp customers get unlimited access to our dynamic Knowledge Base.

New authoritative content is published and updated each day by our team of experts.

Current Customer or Partner?

Sign In for unlimited access

New to NetApp?

Learn more about our award-winning Support