跳转到主内容

未对齐写入如何影响 Element 软件上的卷?

Views:
18
Visibility:
Public
Votes:
0
Category:
element-software
Specialty:
solidfire
Last Updated:

可不使用  

适用场景

NetApp Element 软件

问题解答

  • 为什么在没有数据的情况下会看到对齐的卷写入?
    • 这些卷正在写入,不为空。我们可以在每个卷上看到非零块和持续 1-2 KB/ 秒写入。任何写入都可以取消对齐,因此我们可以看到对已写入到的任何卷执行的未对齐写入。

 

  • 未对齐写入的原因是什么?
    • 如果 512 字节读取或写入未在 4 k 块大小边界上结束,则未对齐写入计数器将递增。发送小于 4 k 的块时,也可能会记录误报。
    • 如果卷显示的增量为少量(通常小于写入块的 5% ),则可能是由于误报所致。 

 

  • 需要采取哪些操作来停止未对齐的写入?
    • 无需执行任何操作即可停止未对齐的写入。写入 SolidFire 时,始终会有未对齐的写入。有第三方工具可用于重新对齐写入,但这些工具存在风险, NetApp 不支持这些工具。

 

  • 此类不对齐写入会产生什么影响?
    • 在 Element Software 9.3 中,我们显著提高了未对齐写入的性能。自此版本以来,我们没有证据表明不对齐的写入会导致明显的性能问题。 

 

  • 它是否会降低性能发生原因?
    • 未对齐写入不如对齐写入理想,可能需要额外的 I/O ,但在 Element 软件 9.3 及更高版本上,对 SolidFire 性能的影响可忽略不计。如果遇到性能问题,请联系 NetApp 支持部门进行深入了解。大多数性能问题都涉及 QoS ,硬件,网络或主机配置,未对齐的写入并不是性能升级的常见发生原因。

追加信息

 

 

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.