Element 软件升级失败,并显示 PostInstallAbort SSL 错误
适用场景
- Element 软件版本 11.0 至 12.0
- SolidFire AFA
- NetApp HCI
问题描述
在将 SolidFire 节点升级到 Element 11.0 到 12.0 版期间,升级可能会失败,并显示以下错误:
2020-03-05 23:37:59: PostInstallAbort 87%: [UnhandledError pid=6394 cmd=cp ${SSL_DIR}/{node.crt,node.key,node.ssl} ${CHROOT}/${SS...]
例如:
2020-03-05 23:27:26: Prepare 0%: Preparing for iRTFI
.
2020-03-05 23:28:02: PreparePivotRoot 0%: Preparing for pivot root
.
2020-03-05 23:29:31: DriveUnlock 20%: Detecting and unlocking drives
2020-03-05 23:29:33: Backup 27%: Backing up
. . . .
2020-03-05 23:33:28: BackupKexecLoad 27%: Loading kexec kernel
2020-03-05 23:33:36: Firmware 47%: Flashing firmware
2020-03-05 23:33:36: Warning: This step may take up to 30 minutes to complete. Do not interrupt the upgrade or power cycle the storage node during this step. Doing so may make the storage node unusable
2020-03-05 23:33:44: Partition 60%: Partitioning drives
.
2020-03-05 23:34:20: Image 67%: Unpacking root filesystem image
.
2020-03-05 23:35:44: Configure 73%: Configuring unpacked image
2020-03-05 23:35:50: PostInstall 87%: Starting RTFI Post Install
. . .
2020-03-05 23:37:59: PostInstallAbort 87%: [UnhandledError pid=6394 cmd=cp ${SSL_DIR}/{node.crt,node.key,node.ssl} ${CHROOT}/${SS...]