跳转到主内容

升级到12.5或12.7后、集群报告MEMORY_GB应为256、但为240

Views:
2
Visibility:
Public
Votes:
0
Category:
netapp-hci<a>2009-181194.</a>
Specialty:
hci
Last Updated:

适用场景

  • NetApp Element 软件12.5、12.7.
  • NetApp H401S、H300S、H500S、H700S
  • BIOS NAT3.4
  • BMC 6.98

问题描述

  • 升级到Element 12.5或12.7后、触发集群故障:

        hardwareConfigMismatch MEMORY_GB should be >= 256 but is 240

  • 在系统运行状况事件日志(SEL)中、事件报告为  

Failing DIMM: DIMM location (Correctable memory component found) (P2-DIMMF1) - Assertion

  • 在BMC图形用户界面中、硬件信息显示容量为一半的DIMM

dimm-picture.png

  • 在节点启动阶段、它会报告为

Failing DIMM: DIMM location (Correctable memory component found) P2-DIMMF1

 

 

Sign in to view the entire content of this KB article.

New to NetApp?

Learn more about our award-winning Support

NetApp provides no representations or warranties regarding the accuracy or reliability or serviceability of any information or recommendations provided in this publication or with respect to any results that may be obtained by the use of the information or observance of any recommendations provided herein. The information in this document is distributed AS IS and the use of this information or the implementation of any recommendations or techniques herein is a customer's responsibility and depends on the customer's ability to evaluate and integrate them into the customer's operational environment. This document and the information contained herein may be used solely in connection with the NetApp products discussed in this document.