跳转到主内容

将 H610s 添加到群集后出现“ Incorrect BIOS Setting ( BIOS 设置不正确)”警告

Views:
27
Visibility:
Public
Votes:
0
Category:
h-series
Specialty:
solidfire
Last Updated:

状态信息

适用于

  • NetApp H610 存储节点

问题

After adding a new or replacement node to a cluster, hardwareConfigMismatch 和nodeHardwareFault 警报 such as the following are logged:
 
  • Incorrect bios setting "CPU Stepping" should be == <0> but is <7>
  • Incorrect bios setting "System RAS Type" should be == <0> but is <6>
  • Incorrect bios setting "ME PTT Supported" should be == 0 but is 1
  • Incorrect bios setting "PCIE Port assigned to LAN" should be == <0> but is <5>
  • Incorrect bios setting "PCH Stepping" should be == <0> but is <53>
  • Incorrect bios setting "Gbe Region Valid" should be == [00]Disable but is [01]Enable
  • Incorrect bios setting "Anti Flash Wearout Supported" should be == 0 but is 1
  • Incorrect bios setting "IP Port" should be == <65535> but is <443>
  • Incorrect bios setting "FPK Port 3 Present" should be == 0 but is 1
  • Incorrect bios setting "FPK Port 2 Present" should be == 0 but is 1
  • Incorrect bios setting "FPK Port 1 Present" should be == 0 but is 1
  • Incorrect bios setting "FPK Port 0 Present" should be == 0 but is 1
  • Incorrect bios setting "Current IPMI over LAN" should be == [FF]Unknown but is [01]Enabled
  • NETWORK_FIRMWARE_VERSION_ETH1 should be == 14.20.1010 (MT_2420110034) but is 14.22.1002 (MT_2420110034)
  • NETWORK_FIRMWARE_VERSION_ETH0 should be == 14.20.1010 (MT_2420110034) but is 14.22.1002 (MT_2420110034)

 

CUSTOMER EXCLUSIVE CONTENT

Registered NetApp customers get unlimited access to our dynamic Knowledge Base.

New authoritative content is published and updated each day by our team of experts.

Current Customer or Partner?

Sign In for unlimited access

New to NetApp?

Learn more about our award-winning Support